Soft IP: USB 3.0, USB 2.0, Ethernet, SATA, WUSB
Innovative Logic offers reusable soft IP for high speed applications. All our IPs are coded in verilog HDL using RMM guidelines. These IPs go through rigorous verification before getting released to you. The verification is done using SystemVerilog.
USB 3.0 Demo Video
USB 3.0 OTG/Host/Device IP
Innovative Logic SS-OTG controller IP is complaint with OTG&EH3.0. SS-OTG controller is able to dynamically swap host/peripheral roles while operating at SuperSpeed using Role Swapping Protocol (RSP) as defined in OTG&EH3.0 specification.
» Learn More
USB 3.0 Device IP
USB 3.0 device controller IP is designed to be used in a system to provide Super High speed USB connectivity between the device it is being used and the USB host. USB 3.0 Device controller IP is compliant with USB3.0 spec1.0 and AXI interface. USB 3.0 IP is available in RTL source code and FPGA netlist format. The deliverables of USB 3.0 IP also include complete verification environment along with test vectors using SystemVerilog.
» Learn More
USB 2.0 High Speed OTG IP
USB2.0 IP is a HS_FS USB controller, OTG capable, dual role USB2.0 compatible.
» Learn More
USB 2.0 Full Speed OTG IP
USB2.0 Ip is ‘Dual-role’ USB controller. It complies with both the USB standard for FS functions and the On-The-Go supplement.
» Learn More
SATA Device/Host IP
Serial ATA (SATA) is high bandwidth serial interface up to 300MB/s for storage systems. It is software compatible with legacy ATA devices. Device Controller typically integrated in a storage peripheral (Hard disk).
» Learn More
10/100 Mbps Ethernet Controller
10/100 Ethernet is Dual Speed Ethernet MAC controller support MII, SMII and RMII interfaces. It also supports AHB based AMBA system with optional DMA controlled.
» Learn More
10/100/1000 Mbps Ethernet IP
10/100 Ethernet MAC controller supports GMII, RMII, SMII, RGMII, SGMII, and 10-bit PHY interfaces. It also supports AHB based AMBA system with optional DMA controller.
» Learn More
10 Gigabit Ethernet IP
10 Gigabit Ethernet MAC controller supports XGMII and XAUI and XSBI interfaces. It also supports for complete, FPGA based, layer 2 subsystem.
» Learn More
WUSB IP
Wireless USB Device Controller compliant to spec 1.0 supporting all four transfer types.
» Learn More
UWB MAC IP
UWB MAC is compliant with ECMA 368 standard. Has capability to interface with many protocols like ethernet, Wireless USB, Blue tooth etc. Has AMBA AXI interface for integration with controller.
» Learn More