USB 3.1, USB 3.0, USB 2.0, Ethernet IP


Innovative Logic offers reusable soft IP for high speed applications. All our IPs are coded in verilog HDL using RMM guidelines. These IPs go through rigorous verification before getting released to you. The verification is done using SystemVerilog.

 

USB 3.1/3.0 Demo Video



USB 3.1 OTG or Dual Role Host & Device Controller IP

Innovative Logic USB 3.1 dual role device and host controller IP is compliant with the latest USB.org specification and works at SuperSpeedPlus mode, SuperSpeed mode.  It is fully backward compatible with USB 3.0 & USB 2.0. USB 3.1 dual role controller IP is able to dynamically swap host/peripheral roles while operating at SuperSpeed using Role Swapping Protocol (RSP) .
» Learn More

USB 3.1 Device Controller IP

USB 3.1 device controller IP is designed to be used in a system to provide Super High speed USB connectivity (10 Gbps) between the device it is being used and the USB host. USB 3.1 Device controller IP is compliant with the latest USB3.1 specification and AXI interface. USB 3.1 IP is available in RTL source code and FPGA netlist format. The deliverable of USB 3.1 IP also include complete verification environment along with test vectors using SystemVerilog.
» Learn More

USB 3.0 OTG or Dual Role Host & Device IP

Innovative Logic USB 3.0 dual role device and host controller IP is compliant with OTG & EH3.0.  USB 3.0 dual role controller IP is able to dynamically swap host/peripheral roles while operating at SuperSpeed using Role Swapping Protocol (RSP) . USB 3.0 dual role IP has been certified by USB IF and it has been tested with hundreds of available USB 3.0 devices  to ensure full interoperability.  Innovative Logic USB 3.0 dual role IP has been in billions of sockets working seamlessly with many USB 3.0 devices available in the market.
» Learn More

USB 3.0 Device Controller IP

USB 3.0 device controller IP is designed to be used in a system to provide Super High speed USB connectivity between the device it is being used and the USB host. USB 3.0 Device controller IP is compliant with the latest USB3.0 specification and AXI interface. USB 3.0 IP is available in RTL source code and FPGA netlist format. USB 3.0  device IP has been certified by USB IF and it has been tested with many available USB 3.0 hosts to ensure full interoperability.  Innovative Logic USB 3.0 device controller IP has been in billions of sockets working seamlessly with many USB 3.0 hosts available in the market. The deliverable of USB 3.0 IP also include complete verification environment along with test vectors using SystemVerilog. Innovative Logic has been licensing their USB 3.0 IP for last 5+ years to many clients ranging from top tier 1 to many mid and small size companies wordwide.
» Learn More

USB 2.0 High Speed OTG Controller IP

USB2.0 IP is a HS_FS USB controller, OTG capable, dual role USB2.0 compatible.
» Learn More

USB 2.0 Full Speed OTG Controller IP

USB2.0 Ip is ‘Dual-role’ USB controller. It complies with both the USB standard for FS functions and the On-The-Go supplement.
» Learn More

SATA Device/Host Controller IP

Serial ATA (SATA) is high bandwidth serial interface up to 300MB/s for storage systems. It is software compatible with legacy ATA devices. Device Controller typically integrated in a storage peripheral (Hard disk).
» Learn More

10/100 Mbps Ethernet Controller IP

10/100 Ethernet is Dual Speed Ethernet MAC controller support MII, SMII and RMII interfaces. It also supports AHB based AMBA system with optional DMA controlled.
» Learn More

10/100/1000 Mbps Ethernet Controller IP

10/100 Ethernet MAC controller supports GMII, RMII, SMII, RGMII, SGMII, and 10-bit PHY interfaces. It also supports AHB based AMBA system with optional DMA controller.
» Learn More

10 Gigabit Ethernet Controller IP

10 Gigabit Ethernet MAC controller supports XGMII and XAUI and XSBI interfaces. It also supports for complete, FPGA based, layer 2 subsystem.
» Learn More

WUSB IP

Wireless USB Device Controller compliant to spec 1.0 supporting all four transfer types.
» Learn More

UWB MAC IP

UWB MAC is compliant with ECMA 368 standard. Has capability to interface with many protocols like ethernet, Wireless USB, Blue tooth etc. Has AMBA AXI interface for integration with controller.
» Learn More